Anime.Net
Visualflex.NET / Giga-Corp

Store   |   Products    |   Services  |   Support  |   Contact Us  |   Search  

En
Fr


Gigagon Data Corporation

Storage Products


Our Creed of the Mobile Rack
"The RH, SI, and SNT series are the world's three most popular manufactured Mobile Rack. RH, SI, and SNT are available from many vendors worldwide. Buying any other type can lead your data storage into extinction with proprietary technology. Users often make the mistake in buying unpopular Mobile Racks, only to find out shortly that they have been discontinued, or their supplier has gone out of business."

Manufacturers' Product Pages
> SNT Product Information
> RH Product Information
> SI Product Information
> Kingston Data Express Product Information

Detailed Measurements and Specifications of Specific Models
> SI-115A
> SI-117A
> SI-130WS
> SK-12A
> SNT-101A
> SNT-105A
> SNT-107AF
> SNT-126
> SNT: Important install tip
> RH-06-IDE
> RH-10-IDE
> RH-INNER-RACK
> RH-16.17.32.57.MR-26.27
> Aluminum vs. Plastic

> Unsorted Gallery of Removable Drive Frames

Q: What are installation requirements?
A: An entire kit is to be installed in any available 5,25" bay, just like installing another CD-ROM, or an old 5,25" floppy drive! Cooling is important, poor air ventilation will turn your caddy into an oven, trapping the heat from the hard drive. This is specially noted for ATA-33/66/100 drives. You want adequate air flow of fresh air coming outside from the front of the desktop computer, sucked thru the air gap of the frame and caddy, and drawn out thru the rear of the computer. The fan found inside all power supplies should be drawing air from inside the case, out thru the rear of the computer.

Q: How do I know my hard drive isn't overheating?
A: Check your computer after being powered on for 30 minutes. The hard drive is allowed to be very warm, but not hot to the point so you can't touch it. You can remove the top cover of the sled. If this still doesn't solve it, you may need to install a secondary cooling fan to draw air out of the case. Most desktop cases have space to mount extra fans. If in doubt, always purchase the removable drive with the built-in cooling fan. You can also mount harddisk cooling fans on another empty 5.25" bay on top of the mobile rack, to draw cold air to sweep across the top of the harddisk drive in the sled.

HP® Compatible Drive Mounting Kits

Part Number: 01-4120
Device: 5¼" Device (CD/DVD)
Description: Slide Rails
Compatible:  All Vectra/Kayak PC®
 
Part Number: 01-6510
Device:  3½" FDD/HDD
Description: Slide Rails
Compatible:  All Vectra/Kayak PC®
 
01-4082 01-6511
Device: 3½" HDD
Description: Rear Mounting Tray
Compatible: All Vectra PC®
 
Part Number: 01-6512
Device: 5¼" Device
Description: 5¼" Drive Tray
Compatible: All NetServer®
 
Part Number: 01-6513
Device: 3½" SCSI SCA HDD
Description: Hot Plug HDD Tray
Compatible: NetServer® LHLX/LD/LH Pro/LX Pro
 
Part Number: 01-4152-01
Device: 3½"  1"High SCA HDD
Description: Hot Plug HDD Tray
Compatible: NetServer® LH3/LH4/LC2000/LC3000/LT6000R/LPr/LH3r/LH4r
 
Part Number: 01-4153
Device: 3½"  1.6"High SCA HDD
Description: Hot Plug HDD Tray
Compatible: NetServer® LH3/LH4/LC2000/LC3000/LT6000R/LH3r/LH4r
 
Part Number: 01-4152 Spacer
Device: For 01-4152 Tray 
Description: Hot Plug HDD Tray Spacer
Compatible: NetServer® LH3/LH4/LC2000/LC3000/LT6000R/LPr/LH3r/LH4r

 

Copyright ©2000 Ci.  All products are third party products. HP, Vectra, PC, Kayak PC, NetServer and all other logos, names and trademarks here and after are trademarked by respected companies. All rights reserved.

1.514.990.7787

> privacy and legal statement
> confidentialité et énoncé juridique